The Neuropactor™comes with a complete set of 5 tips. The threads are of different length than tips for the Impact One™, but they can be installed into that instrument.
The tips each consist of a main shaft body with diameter of 5 mm. Added at the end are a length of shaft of one of the 5 diameters. The top is a threaded length of shaft to screw into the actuator.
DIFFERENCES:
Every tip in this has approximately the same mass, 6.05 grams achieved by adjusting the body length slightly. The mass of the piston plus all moving parts except tip is 54 grams. So the total weight of moving parts is 60 grams. This gives each impact the same momentum. Mass differences do not exist to confound with velocity settings or tip size.
The Neuropactor™ actuator has special threads to minimize the tip working loose after a few impacts. The tips have flats on the side and come with a small wrench to help install them against some resistance. The core piston will not rotate when a tips is installed or removed.
2520 Full set of 5 interchangeable impact tips (1, 1.5, 2, 3, 5 mm tips)
2520 is the SKU for the full set. To order just one specific tip size, use 2520-S, replace S with the desired tip diameter.
Custom rounded tips can be prepared.